CF ABOVE-GROUND COVER ALU SERIES

• For rectangular in-ground pools (maximum corner radius: 20 cm).
• Dimensions: from 2.00 x 3.00 m to 5.00 x 10.00 m (including steps).

TERMINALS :

• Made entirely of textured anthracite grey aluminium.
• Easy installation with wide, stable bollard base.
• Proven robust material from the professional market
• 100% recyclable.

AXIS & MOTORISATION :

• 12V tubular motor with adjustable limit switches.
• Mains-powered, with 200W box including resettable electrical protection.
• 20µm anodised aluminium shaft.
• Shaft and roller shutter supported by bearings integrated into the terminals: extended motor life.
• Key-operated control, supplied with 2 keys.

SHUTTER :

• White, grey, beige or blue opaque PVC slats.
• 69 mm wide slats for an attractive curtain and reduced roll-up diameter.
• Pushlock* attachment kits for installation on 2 pool widths.
  *Pushlock available as a straddle mount on the base or pegged into the wall to suit every project, with a wide range of colours to match the liner.

OPTIONS :

• LivePool: shutter opening/closing controlled by smartphone.
• Stop Sel box for communication with the chlorinator.
• Automatic switch: an electronic device that stops the shutter opening if an abnormal motor force is detected, indicating that the shutter is still attached.

REEL :

• Motor can be easily assembled and dismantled without removing the axle.
• Height to shaft: 32 cm.
• IP55 terminals.
• Floor fixing included (stainless steel lag bolts and plugs).
• Power supply via 2-core sheathed cable (not supplied), minimum cross-section depending on distance between bollard and enclosure, refer to installation instructions.

PANEL :

• Extruded articulated PVC slats.
• Anti-UV treatment.
• Width: 69 mm / Thickness: 13 mm.
• No lead additives.
• Resistant to stains created by organic deposits (e.g. leaves, plant debris).
• Material complies with the ageing resistance requirements defined in standard NFT-54-405-1: 2013.

Finishing caps :

• Mounted in the continuity of the blade.
• 3 sizes available: S (15 mm), Standard (25 mm), XL (35 mm), allowing the width of the curtain to be adjusted ( /- 2 cm) without remanufacturing the slats.
• By default, our orders are delivered with standard caps.
• Caps adapted to shelves and staircases.

Assembly methods :
To make it easier to assemble the curtain on site (due to space constraints, for example), we offer 2 assembly methods:

• Sliding: Easy to handle, but requires space at the edge of the pool.
• Clipping: Ideal if there is no space at the edge of the pool.
• Waterproofing process: by gluing *
  * With this process, the dimensions of the slats can be adapted on site. After cutting the slat and fitting a new cap (available in the spare parts catalogue), it’s easy to reposition the original cap.

HANGERS :

• Pushlock attachment kit.
• Ultra-strong ABS cap (identical to that of the sealable parts range).
• Aesthetic and discreet safety kit, consisting of a black base (to be fixed) and a coloured cover.
• Match the colour of the Pushlock to that of the liner for optimum aesthetic results.
• The apron is supplied with straps for attaching to the Pushlock, with coated straps for dirt-free ageing.

• To comply with safety standard NF P90-308, the curtain made of 69 mm wide opaque PVC slats must be at least 2.00 m wide.
• Pushlock fasteners must be installed less than 50 cm from the edge and at a distance of less than 2.5 m between each fastener.

• Class B coverage in accordance with EN 17645.
• Effect on evaporation: With an ROI of 99.1%, the louvres block evaporation. On a day when the cover is open for 2 hours, this saves 180 litres of the 200 litres lost if the pool were uncovered (typical case of a 4 x 8 m pool).
• Insulating effect: With an I value of 51 W/m², the slats significantly reduce heat loss and conserve the heat generated by the pool heating system.
• Solar effect: With an S index of 11 to 19%, depending on the colour of the slats, the shutter has a relatively blocking effect on solar radiation, keeping the water temperature under control even during very sunny periods. The opacity of the slats greatly limits photosynthesis in the water, reducing the need for water treatment.
• Result: With a natural heat balance of -33 to -41 W/m², the louver reduces heat loss from an uncovered pool by 79% to 83%.