BAR COVER CF COVERKIT

For in-ground pools from 3m x 7m up to 4m x 9m with concrete deck.

ROOF :
– Anti-UV and fungicide treatment.
– Exceptional dimensional stability.
– Excellent resistance to deformation.
– Finished with a welded hem.
– Rainwater drainage holes are fitted with a flap opening.

HANGING AND TENSIONING :
– Patented “easy” stainless steel ratchet for twice as easy tensioning.
– Movable straps along the bars to adapt to the constraints of the anchor holes.
– Black straps.
– Anchors for concrete decking supplied.

BARS :
– Anodised aluminium.
– Grey end caps.
– Protective skid for coping under bars.

FABRIC :
– Ultra-resistant, durable fabric.
– PVC-coated polyester weft.
– 580 g/m².
– Anti-UV varnish to prevent dirt from adhering.
– Supplied in panels that slide into the bars, allowing after-sales replacement in the event of damage.

HANGING AND TENSIONING :
– Easy” ratchet: hoist-like effect means you use half the force for the same tensioning result.
– Long-lasting polyester straps for outdoor use.
– Telescopic anchoring: does not protrude from the ground when not in use.
– Anchor for concrete floors, no need for grouting.

BARS :
– Made-to-measure extruded aluminium alloy bars.
– Equipped with grooves for easy installation and replacement of fabric panels.

UNIQUE CONCEPT :
Coverkit is a unique bar cover concept.
– You can build your own cover using standardised components held in stock (in-store or available for delivery in 24/48 hours), without having to measure the entire pool.
– Presented in kit form, the bar cover can be assembled by 2 people in just 2 hours. Each bar is delivered in a short section to be sleeved and screwed on.
– Choose a 3 m or 4 m pack depending on the width of your pool, then for lengths up to 7 m, use only 2 packs A and B; up to 8 m, add pack C and 2 packs C up to 9 m.
– Easy to transport: packages are 1.90 m long and weigh a maximum of 24 kg.

CF Coverkit bar covers comply with NF P90-308, subject to an 80 cm concrete deck around the edge of the pool, and the dimensions of the pool (dimensions between coping stones):
– Pack 3: maximum pool width 3.06 m
– Pack 4: maximum pool width 4.06 m
– Pool lengths: 7.02 / 8.02 / 9.02 m maximum.

– Class B coverage to EN 17645
– Effect on evaporation: with an ROI of 99.6%, the slats block evaporation. On a day when the pool is uncovered for 2 hours, this saves 180 litres out of the 200 lost if the pool were uncovered (typical case of a 4×8 m pool).
– Insulating effect: with an I index of 56 W/m², the cover and the air “mattress” created underneath significantly reduce heat loss and help conserve the heat provided by the pool heating system.
– Solar effect: with an S index of 17%, the cover has a relatively blocking effect on solar radiation, keeping the water temperature under control even during very sunny periods. The opacity of the cover also greatly limits photosynthesis in the water, reducing the need for water treatment.
– Result: with a natural heat balance of -23 W/m², Coverkit reduces heat loss from a bare pool by 88%.